The automatic ImageBlast 1600 - 2600 series sandblasting systems have been specially developed for the fully automatic sandblasting of large flat glass surfaces. The systems are designed so that both individual pieces and large series of glass, stone and metal can be processed quickly, easily and productively. The combination of high-quality components, technical features, compact design and low price level make the ImageBlast series blasting systems an attractive alternative for finishing companies with the highest quality requirements. As the crowning glory of our ImageBlast system, these systems are particularly suitable for use with our patented, photo-technical sandblasting films such as R-Series, UltraPro and RapidMask. Create your own sandblast surfaces quickly and easily! All models offer a wide range of options and can be individually adapted to your requirements. A demonstration unit of the HARKE ImageBlast 1600A is installed at our site in Bochum and can be viewed and tested at any time!Standard Key Features: Entry and Exit conveyor with 200cm each (length is adjustable if necessary)Robust construction allows to load machine with pieces up to 40mm thicknessSoft brushes on the conveyor structure to avoid scratchesEntry sensor that al lows to place piece on every position of the conveyorExit sensorMoving parts like guns movement system is instal led outside the blasting areaLaser cutted high quality body plates2 large windows in front door made of 3-layer safety glassTwo holes in front door for manual sandblastingFiltration installed inside machine body, no external filtrationHigh quality pulse jet cleaning and filter systemFilter system with 4 filtration cartridgesConveyer cleaning systemConveyer saving system (easy to replace)Up to 3x 8mm sandblasting guns1x manual sandblasting guns (8mm) with external foot pedal1x airjet cleaning pistolSIEMENS touchscreen PLC (with 1 program and 20 zones)Adjustable setting: x/y coordinates, pressure, nozzle speed, nozzle moves, conveyor steps, vibration, light and exhaustionOnboard Diagnostic system2 inverterSIM-card for information savingTop light inside cabinetVibration system for constant abrasive flowAbrasive filtration sieve Available Upgrades: Program upgrade to 20 or 100 programs (each program with 20 zones)Shading system (automatically adjustable sandblast pressure du ring movement for creating shading effects)Third sandblasting gunAuxiliary external exhauster

BubbleEx wire wheel is a handy tool for easy removal of air pockets between the film and the substrate, e.g. glass, stone, wood, metal, etc. With the help of the 0.06 mm wire bristles, the tool perforates the membrane, allowing the air to escape.

The CrystalBlast Pro X2 sandblasting cabinet convinces with its technical features, high-quality construction and compact design at an attractive price-performance ratio. The system is designed in such a way that both individual pieces and large-volume productions of glass, stone and metal can be completed quickly, easily and precisely. The CrystalBlast Pro X2 is therefore an attractive alternative for processing companies with the highest quality requirements.   The CrystalBlast Pro X2 is designed to eliminate the need for maintenance and its ease of operation will provide many successful years of sandblasting. In addition, the sandblasting cabinet features enhanced dust filtration with a semi-automatic pneumatic filter cleaning cycle.   Advantages:   Semi-automatic pneumatic vibrato dust collectorNew, user-friendly dashboard with compressed air regulator and switch for dust collectorInside Blow-Off GunAccess doors left and right   Large double cartridge filter systemOn-off switchLED lightingPadded armrest22,5l pressure pot with access portRemovable patented separator reclaimerDurable high pressure valve for abrasive flow control3/32 inch (2mm) nozzle with quick connector3/8 inch (9mm) PU blast hoseWith foot pedal, for starting the blasting process 

EasyFix stand was developed for a quick and wrinkle-free application of photoresists. It is perfect to use for rounded objects like glasses, mugs, bottles and other materials with a minimum width of 48mm.