The black silicone squeegee is angled to make it easier to apply paint to a variety of surfaces. Choose one of the six sides to apply your paint. The silicone feels comfortable in the hand and washes off easily.Size: 5cm x 10cm

Burning Paste (Torch Paste) is specially formulated to minimize bleed when used with Ikonart stencils. Torch Paste can be used on wood, denim, cardboard, card stock and more to create unique burned designs. Advantages: Made in the USAComplies with ASTM D-4236Unique thick formula, perfect for use with Ikonart filmStore in a cool, dry placeDo not eatUse only for its intended purposeWear safety goggles & PPEUse in a well ventilated areaMay cause eye irritationNot suitable for children under 12 years of ageApplication: Add your stencil and rub down well to adhere to surfaceApply a thin layer of Torch Paste and squeegee through all mesh openingsScrape off excess and return to the jarRemove the stencil and let the paste absorb/dry for a minimum of two minutesUse a high-powered heat gun (we recommend 1000W or higher) and continuously move the heat over the design until the design begins to look burned; more heat equals a darker burnAfter the entire design is burned wipe your surface to remove any debrisBurning Paste (Torch Paste) is available in a 80g jar.

The Ikonart clipboard makes washing out the Ikonart film much quicker and easier. NOTE: When using the clipboard to clean your used stencil, moisten the clipboard first to prevent the adhesive on the back of the stencil from sticking to the clipboard and distorting the image on your stencil.Weight: 300g Size: 23.0 x 35.0 x 0.5 cm

The ImageJet is an adjustable wash-out gun, which was specially designed and manufactured for the development of R3/ R5, UltraPro, ProRed, ProSuper, UltraPeel and Ultra Vinyl films. The ImageJet can be used in combination with most commercially available high-pressure cleaners as well as a garden hose.

Pressure roller - helpful tool for easy application of sandblasting films! Enables the sandblasting film to be pressed evenly onto the surface of the object to be processed. Our pressure rollers are available in the following widths: 50 mm 100 mm 150 mm

These small black silicone squeegees are perfect for small stencils or hard to reach areas.Benefits:10 small silicone squeegees per packEasy to useEasy to wash offSize: 5.7 x 3.8 cmCan be cut to smaller sizes

Our Tacky Textile Mat makes screen printing with our Ikonart stencils so much easier. Use the self-adhesive mat for printing on textiles to prevent textiles from slipping while you apply your paint or ink. The mat also prevents the paint or ink from bleeding through. Use the clear film cover to protect the adhesive side when not in use. Note: To avoid deformation, avoid extreme heat. Do not iron over the mat, do not use a heat gun and do not place in direct sunlight.Benefits: Standard adhesiveReusableDimensions: 30.5 X 30.5 cmTransparentContains 1 self-adhesive textile matCan also be used as a cutting mat

The TriggerJet is a low-cost, adjustable spray nozzle used in combination with a standard garden hose and tap water to develop sandblast films. This durable polypropylene nozzle can simulate the equivalent of approximately 10 bar (150 PSI).Benefits: Cost effective Adjustable spray nozzle Connects easily to a standard garden hose